SKU: Eaton-115399
Position switch, Roller plunger, Complete device, 1 N/O, 1 NC (late-break), Cage Clamp, Yellow, Insulated material, -25 - +70 °C
Position switch, Basic function: Operating heads, Part group reference: LS(M)-…, Product range: Roller lever, Degree of Protection: IP66, IP67
| Basic function | Position switches Safety position switches |
| Product range | Roller plunger |
| Degree of Protection | IP66, IP67 |
| Features | Complete device |
| Ambient temperature | -25 - +70 °C |
| N/O = Normally open | 1 N/O |
| N/C = Normally closed | 1 NC  |
| Notes | = safety function, by positive opening to IEC/EN 60947-5-1 |
| Contact sequence | |
| Positive opening (ZW) | yes |
| Enclosure covers | Yellow |
| Enclosure covers | |
| Housing | Insulated material |
| Connection type | Cage Clamp |
| Notes | Cage-Clamp is a registered trademark of Wago Kontakttechnik, 32432 Minden, Germany. Accessories for the Cage-Clamp terminals from Wago:power comb, gray, Wago Article No. 264-402 |
| Standards | IEC/EN 60947 |
| Climatic proofing | Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30 |
| Ambient temperature | -25 - +70 °C |
| Mounting position | As required |
| Degree of Protection | IP66, IP67 |
| Terminal capacities >Solid |
1 x (0.5 - 2.5) mm2 |
| Terminal capacities >Flexible with ferrule |
1 x (0.5 - 1.5) mm2 |
| Repetition accuracy | 0.15 mm |
| Rated impulse withstand voltage [Uimp] | 4000 V AC |
| Rated insulation voltage [Ui ] | 400 V |
| Overvoltage category/pollution degree | III/3 |
| Rated operational current [Ie
] >AC-15 >24 V [Ie ] |
6 A |
| Rated operational current [Ie
] >AC-15 >220 V 230 V 240 V [Ie] |
6 A |
| Rated operational current [Ie
] >AC-15 >380 V 400 V 415 V [Ie] |
4 A |
| Rated operational current [Ie
] >DC-13 >24 V [Ie ] |
3 A |
| Rated operational current [Ie
] >DC-13 >110 V [Ie ] |
0.6 A |
| Rated operational current [Ie
] >DC-13 >220 V [Ie ] |
0.3 A |
| Control circuit reliability >at 24 V DC/5 mA [HF ] |
< 10 -7, < 1 fault in 107 operations Fault probability |
| Control circuit reliability >at 5 V DC/1 mA [HF ] |
< 5 x 10-6, < 1 failure at 5 x 106 operations Fault probability |
| Supply frequency | max. 400 Hz |
| Short-circuit rating to IEC/EN 60947-5-1 >max. fuse |
6 A gG/gL |
| Rated conditional short-circuit current | 1 kA |
| Lifespan, mechanical [Operations] | 8 x 106 |
| Mechanical shock resistance (half-sinusoidal shock, 20 ms) >Standard-action contact |
25 g |
| Operating frequency [Operations/h] | ≦ 6000 |
| Mechanical >Actuating force at beginning/end of stroke |
1.0/8.0 N |
| Mechanical >Actuating torque of rotary drives |
0.2 Nm |
| Mechanical >Max. operating speed with DIN cam |
1/1 m/s |
| Mechanical >Notes |
for angle of actuation α = 0°/30° |
| Rated operational current for specified heat dissipation [In] | 6 A |
| Heat dissipation per pole, current-dependent [Pvid] | 0.17 W |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +70 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Width sensor | 31 mm |
| Diameter sensor | 0 mm |
| Height of sensor | 61 mm |
| Length of sensor | 33.5 mm |
| Rated operation current Ie at AC-15, 24 V | 6 A |
| Rated operation current Ie at AC-15, 125 V | 6 A |
| Rated operation current Ie at AC-15, 230 V | 6 A |
| Rated operation current Ie at DC-13, 24 V | 3 A |
| Rated operation current Ie at DC-13, 125 V | 0.8 A |
| Rated operation current Ie at DC-13, 230 V | 0.3 A |
| Switching function | Slow-action switch |
| Switching function latching | No |
| Output electronic | No |
| Forced opening | Yes |
| Number of safety auxiliary contacts | 1 |
| Number of contacts as normally closed contact | 1 |
| Number of contacts as normally open contact | 1 |
| Number of contacts as change-over contact | 0 |
| Type of interface | None |
| Type of interface for safety communication | None |
| Construction type housing | Cuboid |
| Material housing | Plastic |
| Coating housing | Other |
| Type of control element | Roller cam |
| Alignment of the control element | Other |
| Type of electric connection | Other |
| With status indication | No |
| Suitable for safety functions | Yes |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
| Ambient temperature during operating | 25 - 70 °C |
| Degree of protection (IP) | IP67 |
| Degree of protection (NEMA) | 6 |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024