SKU: Eaton-106838
Actuator, angled, long
Actuator, Basic function: actuators, Part group reference: LS…ZBZ/X, Function: Angled actuator, Long, Stainless steel, For use with: For swing doors above 550 mm width
| Basic function | actuators |
| Part group reference | LS…ZBZ/X |
| Function | Angled actuator |
| Description | Long Stainless steel |
| For use with | For swing doors above 550 mm width |
| Notes | for combination with LS-...ZBZ/X basic devices From width: 500 mm |
| Standards | IEC/EN 60947 |
| Climatic proofing | Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30 |
| Mounting position | As required |
| Terminal capacities >Solid |
1 x (0.75 - 2.5) 2 x (0.75 - 1.5) mm2 |
| Terminal capacities >Flexible with ferrule |
1 x (0.5 - 1.5) 2 x (0.5 - 1.5) mm2 |
| Repetition accuracy | 0.02 mm |
| Rated impulse withstand voltage [Uimp] | 4000 V AC |
| Rated insulation voltage [Ui ] | 400 V |
| Overvoltage category/pollution degree | III/3 |
| Rated operational current [Ie
] >AC-15 >24 V [Ie ] |
6 A |
| Rated operational current [Ie
] >AC-15 >220 V 230 V 240 V [Ie] |
6 A |
| Rated operational current [Ie
] >AC-15 >380 V 400 V 415 V [Ie] |
4 A |
| Rated operational current [Ie
] >DC-13 >24 V [Ie ] |
3 A |
| Rated operational current [Ie
] >DC-13 >110 V [Ie ] |
0.8 A |
| Rated operational current [Ie
] >DC-13 >220 V [Ie ] |
0.3 A |
| Supply frequency | max. 400 Hz |
| Short-circuit rating to IEC/EN 60947-5-1 >max. fuse |
6 A gG/gL |
| Mechanical shock resistance (half-sinusoidal shock, 20 ms) >Standard-action contact |
10 g |
| Operating frequency [Operations/h] | ≦ 800 |
| Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XG, XW, XNG |
1700 N |
| Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XWA, XFG, XF |
1600 N |
| Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XNW |
1200 N |
| Electromechanical >For magnet >Power consumption >at 120 V AC |
8 VA |
| Electromechanical >For magnet >Power consumption >at 24 V DC |
8 W |
| Electromechanical >Pick-up and drop-out values |
0.85 - 1.1 x Us |
| Electromechanical >Magnet duty factor |
100 % ED |
| Rated operational current for specified heat dissipation [In] | 0 A |
| Heat dissipation per pole, current-dependent [Pvid] | 0 W |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +40 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Please enquire |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Not applicable. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Model | Actuator with vertical mounting |
| Product Standards | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14; CE marking |
| UL File No. | E29184 |
| UL Category Control No. | NKCR |
| CSA File No. | 12528 |
| CSA Class No. | 3211-03 |
| North America Certification | UL listed, CSA certified |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024