Ürün Açıklaması

Position switch, 2 N/C, basic, spring force
Position switch, Basic function: Position switches, Safety position switches, Part group reference: LS…ZBZ/X, Product range: Basic units with spring-powered interlock (closed-circuit principle), Degree of Protection: IP65, Features: Basic device, expandable, Ambient temperature: -25 - +40 °C, Description: With interlock monitoring, with auxiliary release mechanism, Monitoring of door position: continuous, Contacts N/C = Normally closed: 2 NC, Notes: = safety function, by positive opening to IEC/EN 60947-5-1, Rated control voltage for magnetic drive: Us= 120 V 50/60 Hz V, Housing: Insulated material, Connection type: Screw terminal, Standards: IEC/EN 60947

Basic function	Position switches Safety position switches
Part group reference	LS…ZBZ/X
Product range	Basic units with spring-powered interlock (closed-circuit principle)
Degree of Protection	IP65
Features	Basic device, expandable
Ambient temperature	-25 - +40 °C
Description	With interlock monitoring with auxiliary release mechanism Monitoring of door position: continuous
Approval
N/C = Normally closed	2 NC
Notes	= safety function, by positive opening to IEC/EN 60947-5-1
Contact sequence
Rated control voltage for magnetic drive [Us ]	120 V 50/60 Hz V
Housing	Insulated material
Connection type	Screw terminal
Notes	Switch must never be used as a mechanical stop! The operating head can be rotated manually in 90° steps without tools to suit the specified level of actuation. With the actuator inserted, the N/O contact is open and the N/C contact is closed. For degree of protection IP65, use V-M20 (206910) cable glands with connecting thread of max. 9 mm length. In the event of power failure (e.g., during commissioning), the device can be released with a screwdriver. The auxiliary release mechanism must be sealed! ￫ Instructional leaflet IL 05208005Z
Standards	IEC/EN 60947
Climatic proofing	Damp heat, constant, to IEC 60068-2-78; damp heat, cyclical, to IEC 60068-2-30
Ambient temperature	-25 - +40 °C
Mounting position	As required
Degree of Protection	IP65
Terminal capacities >Solid	1 x (0.75 - 2.5) 2 x (0.75 - 1.5) mm2
Terminal capacities >Flexible with ferrule	1 x (0.5 - 1.5) 2 x (0.5 - 1.5) mm2
Terminal screw	PH1
Tightening torque for terminal screw	0.9 Nm
Repetition accuracy	0.02 mm
Rated impulse withstand voltage [Uimp]	4000 V AC
Rated insulation voltage [Ui ]	400 V
Overvoltage category/pollution degree	III/3
Rated operational current [Ie ] >AC-15 >24 V [Ie ]	6 A
Rated operational current [Ie ] >AC-15 >220 V 230 V 240 V [Ie]	6 A
Rated operational current [Ie ] >AC-15 >380 V 400 V 415 V [Ie]	4 A
Rated operational current [Ie ] >DC-13 >24 V [Ie ]	3 A
Rated operational current [Ie ] >DC-13 >110 V [Ie ]	0.8 A
Rated operational current [Ie ] >DC-13 >220 V [Ie ]	0.3 A
Supply frequency	max. 400 Hz
Short-circuit rating to IEC/EN 60947-5-1 >max. fuse	6 A gG/gL
Rated conditional short-circuit current	1 kA
Lifespan, mechanical [Operations]	1 x 106
Mechanical shock resistance (half-sinusoidal shock, 20 ms) >Standard-action contact	10 g
Operating frequency [Operations/h]	≦ 800
Mechanical >Actuating force at beginning/end of stroke	25/15 (plug-in/pull-out) N
Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XG, XW, XNG	1700 N
Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XWA, XFG, XF	1600 N
Mechanical >Mechanical holding force acc. to GS-ET-19 (04/2004) >XNW	1200 N
Electromechanical >For magnet >Power consumption >at 120 V AC	8 VA
Electromechanical >For magnet >Power consumption >at 230 V AC	11 VA
Electromechanical >For magnet >Power consumption >at 24 V DC	8 W
Electromechanical >Pick-up and drop-out values	0.85 - 1.1 x Us
Electromechanical >Magnet duty factor	100 % ED
Rated operational current for specified heat dissipation [In]	6 A
Heat dissipation per pole, current-dependent [Pvid]	0.13 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	-25 °C
Operating ambient temperature max.	+40 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Width sensor	60 mm
Diameter sensor	0 mm
Height of sensor	173 mm
Length of sensor	39 mm
Rated operation current Ie at AC-15, 24 V	6 A
Rated operation current Ie at AC-15, 125 V	6 A
Rated operation current Ie at AC-15, 230 V	6 A
Rated operation current Ie at DC-13, 24 V	3 A
Rated operation current Ie at DC-13, 125 V	0.8 A
Rated operation current Ie at DC-13, 230 V	0.3 A
Switching function	Slow-action switch
Switching function latching	No
Output electronic	No
Forced opening	Yes
Number of safety auxiliary contacts	2
Number of contacts as normally closed contact	2
Number of contacts as normally open contact	0
Number of contacts as change-over contact	0
Type of interface	None
Type of interface for safety communication	None
Construction type housing	Cuboid
Material housing	Plastic
Coating housing	Other
Type of control element	Other
Alignment of the control element	Other
Type of electric connection	Other
With status indication	No
Suitable for safety functions	Yes
Explosion safety category for gas	None
Explosion safety category for dust	None
Ambient temperature during operating	25 - 70 °C
Degree of protection (IP)	IP65
Degree of protection (NEMA)	13
Product Standards	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14; CE marking
UL File No.	E29184
UL Category Control No.	NKCR
CSA File No.	12528
CSA Class No.	3211-03
North America Certification	UL listed, CSA certified
Degree of Protection	IEC: IP65, UL/CSA Type 3R, 4X (indoor use only), 12, 13