Ürün Açıklaması

Compact PLC, 24 V DC, 12DI(of 4AI), 8DO(T), CAN
Compact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients

Description	Expandable: Inputs/outputs and bus systems individual laser inscription possible with EC4-COMBINATION-*
Digital	easyNet/CANopen® on board
of which can be used as analog
Transistor	12
Supply voltage	4
Dimensions (W x H x D)
Weight	8
Mounting	24 V DC
Solid
Flexible with ferrule	107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Standard screwdriver	0.3 kg
Max. tightening torque	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Operating ambient temperature
Condensation	0.2/4 (AWG 22 - 12) mm2
LCD display (clearly legible)	0.2/2.5 (AWG 22 - 12) mm2
Storage [ϑ]	0.8 x 3.5 mm
Relative humidity, non-condensing (IEC/EN 60068-2-30)	0.6 Nm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4)	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6) >Constant amplitude 0.15 mm	Take appropriate measures to prevent condensation
Vibrations (IEC/EN 60068-2-6) >Constant acceleration 2 g	0 - 55 °C
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	-40 - +70 °C
Drop to IEC/EN 60068-2-31 [Drop height]	5 - 95 %
Free fall, packaged (IEC/EN 60068-2-32)	1080 - 1080 hPa
Mounting position
Overvoltage category/pollution degree	IP20
Electrostatic discharge (ESD) >applied standard	10 - 57 Hz
Electrostatic discharge (ESD) >Air discharge	57 - 150 Hz
Electrostatic discharge (ESD) >Contact discharge	18 Impacts
Electromagnetic fields (RFI) to IEC EN 61000-4-3	50 mm
Radio interference suppression	1 m
Burst	Vertical or horizontal
Burst >Supply cable
Burst >Signal lines	II/2
power pulses (Surge)	IEC EN 61000-4-2, Level 3
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	8 kV
Clearance in air and creepage distances	6 kV
Insulation resistance	10 V/m
Back-up of real-time clock	EN 55011 Class B, EN 55022 Class B
Accuracy of the real-time clock	IEC/EN 61000-4-4, level 3 kV
Write cycles of the retentive memory	2 kV
Rated operational voltage [Ue]	2 kV
Permissible range [Ue]	2 kV (supply cables, symmetrical, EASY...AC) 0.5 kV (supply cables, symmetrical, easy-DC) according to IEC/EN 61000-4-5
Residual ripple	10 V
Input current
Voltage dips	EN 50178, UL 508, CSA C22.2, No. 142
Heat dissipation [P]	EN 50178
Processor
Memory >Program code/data
Memory >Marker/retentive data	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
Cycle time for 1 k of instructions (Bit, Byte)	part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232 >Data transfer rate
PRG interface RS232 >Connection types	10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232 >Potential isolation
PRG interface RS232 >Master mode >Data transfer rate	24 DC (-15/+20%) V
PRG interface RS232 >Master mode >Character formats	20.4 - 28.8 V DC
PRG interface RS232 >Master mode >Number of transmission bytes in a block	≦ 5 %
PRG interface RS232 >Master mode >Number of received bytes in a block	normally 140 mA at Ue
Ethernet >Data transfer rate	≤ 10 (IEC/EN 61131-2) ms
Ethernet >Connection types	Normally 3.4 W
Ethernet >Potential isolation
CANopen® >Data transfer rate	Infineon XC161
CANopen® >Bus termination (first and last station)	256/14 segments of 16 KB each kByte
CANopen® >Connection types	16/4/4/8 KByte
Master mode >Number	< 0.3 ms
Mode slave >Stations
Mode slave >PDO type	4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Mode slave >Control contact rated current	RJ45-bus
Number	none
Inputs can be used as analog inputs	0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Status Display	8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Potential isolation	190 bytes
Rated operational voltage [Ue]	190 bytes
Input voltage	10 MBit/s, 100 m Mbit/s
Input current on 1 signal >Input current at signal 1	RJ45
Deceleration time	No
Cable length	500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter >Number of counter inputs	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter >Value range	2 x RJ45, 8 pole
Incremental counter >Counter frequency	8
Incremental counter >Pulse shape	max. 126 Number
Incremental counter >Counter inputs	Asynchronous, cyclic, acyclic
Incremental counter >Reference input	To DS 301 V4
Incremental counter >Input for reference switch
Incremental counter >Counter inputs I1 and I2, I3 and I4	12
Incremental counter >Signal offset	4 (I7, I8, I11, I12)
Rapid counter inputs >Number	LCD-Display
Rapid counter inputs >Value range	from the outputs: yes to network easyNet, easyLink
Rapid counter inputs >Cable length	24 V DC
Rapid counter inputs >Counter frequency	< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0" > 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Rapid counter inputs >Pulse shape	3.3 (I1 to I6) 2.2 (I7, I8) 3.3 (I9, I10) 2.2 (I11, I12) mA
Number	normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Potential isolation	100 (unshielded) m
Input type	1 (I1, I2, I3, I4)
Signal range	32 Bit
Resolution	≦ 40 kHz
Input impedance	Square
Accuracy of actual value >Within a single device	I1, I2
Conversion time, analog/digital	I3
Input current	I4
Cable length	1
Number	90°
Rated operational voltage [Ue]	2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Permissible range [Ue]	16/32 Bit
Residual ripple	≦ 20 (screened) m
Supply current	≦ 50 kHz
Protection against polarity reversal	Square
Potential isolation
Rated operational current at signal „1” DC per channel [Ie]	4 (I7, I8, I11, I12)
Lamp load without Rv per channel	from the outputs: yes to interface/memory card: no
Residual current on 0 signal per channel	DC voltage
Max. output voltage	0-10 V DC
Short-circuit protection	0.01 V analog 0.01 V digital 10 Bit (value 0 - 1023)
Short-circuit tripping current for Ra ≦ 10 mΩ	11.2 kΩ
Total short-circuit current	± 2, (I7, I8, I11, I12) ± 0.12 V %
Peak short-circuit current	each CPU cycle ms
Thermal cutout	< 1 mA
Max. operating frequency with constant resistive load	≦ 30, screened m
Parallel connection of outputs >With resistive load, inductive load with external suppressor circuit, combination within a group
Parallel connection of outputs >Number of outputs [max.]	8
Parallel connection of outputs >Max. total current	24 V DC
Output status indication	20.4 - 28.8 V DC
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Utilization factor	5 %
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Duty factor	Norm./max. 18/32 at signal 0 24/44 at signal 1 mA
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 1 ms, R = 48 Ω, L = 16 mH >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Utilization factor	from power supply, inputs to the memory card: yes From the inputs: yes
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Duty factor	Max. 0.5 A
Inductive load to EN 60947-5-1 >Without external suppressor circuit >DC-13, T0.95 = 72 ms, R = 48 Ω, L = 1.15 H >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	5 W
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Utilization factor	< 0.1 mA
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Duty factor	2.5 (signal 0 at external load < 10 MΩ) U = Ue - 1 V (signal 1 at Ie = 0.5 A) V
Inductive load to EN 60947-5-1 >Without external suppressor circuit >T0.95 = 15 ms, R = 48 Ω, L = 0.24 H >Max. switching frequency f = 0.5 Hz (max. DF = 50 %)	Yes, electronic (Q1 - Q4), thermal (Q5 - Q8), (analysis via diagnostics input I16, I15)
Inductive load to EN 60947-5-1 >With external suppressor circuit >Utilization factor	0.7 ≦ Ie ≦ 2 per output A
Inductive load to EN 60947-5-1 >With external suppressor circuit >Duty factor	16 A
Inductive load to EN 60947-5-1 >With external suppressor circuit >Max. switching frequency, max. duty factor	32 A
Protection against polarity reversal	Yes
Potential isolation	40000 Operations/h
Bus termination (first and last station)	Group 1: Q1 - Q4 Group 2: Q5 - Q8
Rated operational current for specified heat dissipation [In]	4
Heat dissipation per pole, current-dependent [Pvid]	2 (Caution! Outputs must be actuated simultaneously and for the same length of time.) A
Equipment heat dissipation, current-dependent [Pvid]	LCD-display
Static heat dissipation, non-current-dependent [Pvs]	0.25 g
Heat dissipation capacity [Pdiss]	100 % DF
Operating ambient temperature min.	1500 Operations
Operating ambient temperature max.	0.25 g
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	100 % DF
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1500 Operations
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0.25 g
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	100 % DF
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	1500 Operations
10.2 Strength of materials and parts >10.2.5 Lifting	1 g
10.2 Strength of materials and parts >10.2.6 Mechanical impact	100 % DF
10.2 Strength of materials and parts >10.2.7 Inscriptions	Depending on the suppressor circuit Operations
10.3 Degree of protection of ASSEMBLIES
10.4 Clearances and creepage distances	yes (Caution: A short circuit will result if 0 V or earth is applied to the outputs in the event that the supply voltage is connected to the wrong poles.)
10.5 Protection against electric shock	Yes
10.6 Incorporation of switching devices and components
10.7 Internal electrical circuits and connections	EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	0 A
10.9 Insulation properties >10.9.3 Impulse withstand voltage	0 W
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	0 W
10.10 Temperature rise	3.4 W
10.11 Short-circuit rating	0 W
10.12 Electromagnetic compatibility	-25 °C
10.13 Mechanical function	+55 °C
Contains function building blocks
Contains basic device	Meets the product standard´s requirements.
Contains module rack	Meets the product standard´s requirements.
Contains power supply	Meets the product standard´s requirements.
Contains analogue input module	Meets the product standard´s requirements.
Contains analogue output module	Meets the product standard´s requirements.
Contains digital input module	Does not apply, since the entire switchgear needs to be evaluated.
Contains digital output module	Does not apply, since the entire switchgear needs to be evaluated.
Contains function module	Meets the product standard´s requirements.
Contains technology module	Meets the product standard´s requirements.
Contains communication module	Meets the product standard´s requirements.
Contains memory unit	Does not apply, since the entire switchgear needs to be evaluated.
Contains simulation module	Does not apply, since the entire switchgear needs to be evaluated.
Contains connection cable	Is the panel builder´s responsibility.
Contains control unit	Is the panel builder´s responsibility.
Contains monitor	Is the panel builder´s responsibility.
Contains programming software	Is the panel builder´s responsibility.
Contains engineering software	Is the panel builder´s responsibility.
Contains visualization	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains libraries	Is the panel builder´s responsibility.
Contains documentation	Is the panel builder´s responsibility.
Contains other components	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Software preinstalled
Product Standards
UL File No.	Yes
UL Category Control No.	Yes
CSA File No.	No
CSA Class No.	Yes
North America Certification	Yes
Specially designed for North America	No
Current Limiting Circuit-Breaker	Yes
Degree of Protection	Yes