SKU: Eaton-73190
Shunt release (for power circuit breaker), 400 V 50 Hz, Standard voltage, AC, Screw terminals, For use with: Shunt release PKZ0(4), PKE
Shunt release with screw terminals, for circuit-breaker PKZ(M)0 size
| Product range | Accessories |
| Accessories | Shunt release |
| Actuating voltage | 400 V 50 Hz |
| Voltage type | Standard voltage |
| Current actuation | AC |
| Contact sequence | |
| Connection technique | Screw terminals |
| For use with | Shunt release PKZ0(4), PKE |
| For use with | PKZM0 PKZM4 PKZM0-T PKM0 PKZM01 PKE |
| Notes | Can be fitted to the left of: Motor protective circuit-breaker Cannot be combined with: U‐PKZ0 undervoltage release |
| Terminal capacities >Solid or flexible conductor, with ferrule |
|
| Terminal capacities >Solid or stranded |
1 x (0,75 - 2,5) 2 x (0,75 - 2,5) mm2 |
| Actuating voltage | 1 x (18 - 14) 2 x (18 - 14) AWG |
| Alternating voltage | 400 V 50 Hz |
| AC >Pull-in power [Pick-up] |
|
| AC >Sealing power [Sealing] |
0.7- 1.1 x US |
| Rated operational current for specified heat dissipation [In] | |
| Heat dissipation per pole, current-dependent [Pvid] | 5 VA |
| Equipment heat dissipation, current-dependent [Pvid] | 3 VA |
| Static heat dissipation, non-current-dependent [Pvs] | |
| Heat dissipation capacity [Pdiss] | 0 A |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
0.5 W |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
-25 °C |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
+55 °C |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at AC 50HZ | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at AC 60HZ | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Rated control supply voltage Us at DC | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Voltage type for actuating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Initial value of the undelayed short-circuit release - setting range | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| End value adjustment range undelayed short-circuit release | |
| Type of electric connection | |
| Number of contacts as normally open contact | 400 - 400 V |
| Number of contacts as normally closed contact | 0 - 0 V |
| Number of contacts as change-over contact | 0 - 0 V |
| Suitable for power circuit breaker | AC |
| Suitable for off-load switch | 0 A |
| Suitable for motor safety switch | 0 A |
| Suitable for overload relay | Screw connection |
| Product Standards | 0 |
| UL File No. | 0 |
| UL Category Control No. | 0 |
| CSA File No. | No |
| CSA Class No. | No |
| North America Certification | Yes |
| Specially designed for North America | No |
| Accessories | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024