SKU: Eaton-51211
Copper busbar, 30x10x1500mm, untreated
Flat copper bar for CI distribution system, unhandled surface, 30x10 mm, supplied in lengths=1500mm, Ie=630A, CI distribution board up to 1000A=2x 30x10
| Product range | 60 mm system |
| Accessories | Flat copper bars |
| Single unit/Complete unit | Modular system |
| Description | Flat copper busbars |
| Surface finish | Untreated |
| Rated operational current [Ie] | 630 A |
| Length | 1500 mm |
| For use with | SH1005/4 |
| Cu factor | 4,00 kg |
| Width | |
| Height | 30 mm |
| Interval between busbar centres | 10 mm |
| Material | 60 mm |
| Notes | Copper, non-insulated |
| Standards | Calculating material allowance ￫ General information chapter Selecting the busbar cross-section and the device to be used ￫ Engineering chapter |
| Ambient temperature >Operating ambient temperature max. |
|
| Interval between busbar centres | EN 13061 |
| Interval between busbar centres | +35 °C |
| Rated uninterrupted current | 60 mm |
| Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 12 x 5 mm bar [Iu] |
|
| Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 20 x 5 mm busbar [Iu] |
60 mm |
| Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 30 x 5 mm bar [Iu] |
With temperature deviations, DIN 43671 stipulates that a correction factor k2 must be taken into account |
| Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 12 x 10 mm bar [Iu] |
200 A |
| Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 20 x 10 mm busbar [Iu] |
320 A |
| Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 30 x 10 mm busbar [Iu] |
450 A |
| Rated operational current [Ie] | 360 A |
| Material | 520 A |
| Surface finish | 630 A |
| Operating ambient temperature max. | |
| Rated current In | 630 A |
| Model | |
| Length | Copper, non-insulated |
| Width | Untreated |
| Height | |
| Flexible | For rated uninterrupted current lu of the contact the following applies: according to DIN 43671 correction factor k2 must be taken into account in case of different temperatures. |
| Surface protection | +35 °C |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024