SKU: Eaton-32720
Extension terminal, 3p, 25mm²
Extension terminal for three-phase busbar block protective against direct contact., Ue = 690 V, Iu = 63 A , for connection of:or 2.5-25mm2 stranded or 2.5-16mm2 flexible with ferrule
Product range | Accessories |
Accessories | Incoming terminal |
For use with | PKZM0 PKE12 PKE32 |
Notes | For three-phase commoning link, protected against accidental contact, Ue = 690 V, Iu = 63 A For conductor cross-sections: 2.5 - 25 mm2 stranded 2.5 - 16 mm2 flexible with ferrules AWG 14 - 6, for use on terminals 1, 3, 5 |
Rated operational current for specified heat dissipation [In] | |
Heat dissipation per pole, current-dependent [Pvid] | 63 A |
Equipment heat dissipation, current-dependent [Pvid] | 1.8 W |
Static heat dissipation, non-current-dependent [Pvs] | 5.4 W |
Heat dissipation capacity [Pdiss] | 0 W |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | -25 °C |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Type of accessory | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Product Standards | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
UL File No. | |
UL Category Control No. | |
CSA File No. | Connection clamp |
CSA Class No. | UL 508; CSA-C22.2 No. 14; IEC60947-4-1; CE marking |
North America Certification | E36332 |
Specially designed for North America | NLRV |